Steps To Fix Your Car's Punctured Tyre

Tires that are flat can be an everyday sight. Tires that are flat are among the most common problems that you will encounter while driving a vehicle. A tiny nail, a tiny piece of glass or any sharp object may damage the tyre of your vehicle. Punctured tyres can create a lot of hassle for you. It doesn't matter if the tyre on your vehicle is regular or tubeless, it is not possible to drive through the lanes in such condition as it could damage your vehicle's rims, and even cause accidents.

You might consider that taking your vehicle to the garage is the best option. But, don't you think that fixing the tyre yourself can save your time and effort in finding a repair shop nearby. If you find yourself stuck on a busy highway or in a remote area, it can assist you in escaping trouble. Always carry a kit to help fix your car tyre puncture and also have a car insurance policy? You have an insurance policy for your car in place. This is the step-by-step process to fix your car's damaged tire.

Find the Leak

The first thing to do is find the leak. It can be difficult to identify the culprit which punctured your tyre each time. It could be anything- it could be a nail or a sharp object. It is possible to examine the tire in detail to determine whether it is brittle or cuts. If looking at the tyre in a clear way doesn't help, inflate the tyre to the proper pressure and check if there is a hissing sound. However, if you are in a position to identify the puncture by any means then mix dish soap with water, then apply the mixture on the tyre. You will see bubbles coming out from the leaking area. Mark the spot with tape.

Secure the Lug Nuts, and raise the car

The second step is to lose the lug nuts in order to take off the tyre. This can be done with an impact wrench, or a wrench. This procedure should be completed before you lift the vehicle. Otherwise, it could spin in a dangerous way after the nuts are removed.

The time is now to jack up your car to remove the wheels. To stop the car from spinning and keep it on an even surface or concrete. Use jack stands to keep your car in place. Now, position your car's jack at the jacking points that are recommended for your car, and use it to raise the part that you're working.

Clean the Hole by taking out the Lug Nuts

Remove the lug nuts completely and take the wheel from its base. It is now time to wash the leaky area. Insert the rasp tool into the hole repeatedly.

The Plug

To insert the plug through the hole a plug must be threaded in the middle of an tool for insertion. To ensure a tight seal and easy insertion, you can lubricate your plug using glue or cement. Then, hold the plug in place, and don't move it for more than one minute so that the adhesive sets and then dries. The plug sticking out of the tyre's surface needs to be removed.

Inflate the Tire

For smooth vehicle movement To ensure smooth car movement, fill the tyre with the pressure recommended. Install the wheel, and then remove the floor Jack. Connect the lugs to the rim and torque them.

Now that you have learned the whole procedure of fixing the puncture of your car's tyre, it is possible that you are able to complete the whole procedure without assistance. It is important to remember that fixing your own tyre may not be the ideal solution. For a professional solution go to a shop.